JDM-157 1/14 remote control off-road truck 6*6 truck trailer climbing trailer army truck heavy support Ratio: 1 : 14 Dimensions: length 674 , width 227 , height 242 (without antenna 273 ), unit MM Wheelbase: Total wheelbase 478 , front axle to middle axle 363 , middle axle to rear axle 115, unit MM Front shock absorber stroke: 20 MM Gearbox: All-metal simulation planetary two-speed gearbox Axle: Metal axle with differential lock function
Read moreJDM-157 1/14 remote control off-road truck 6*6 truck trailer climbing trailer army truck heavy support
Ratio: 1 : 14
Dimensions: length 674 , width 227 , height 242 (without antenna 273 ), unit MM
Wheelbase: Total wheelbase 478 , front axle to middle axle 363 , middle axle to rear axle 115, unit MM
Front shock absorber stroke: 20 MM
Gearbox: All-metal simulation planetary two-speed gearbox
Axle: Metal axle with differential lock function
Car shell: plastic simulation hard shell, with interior, the door can be opened, the hood can be opened, and the simulation car lights
Chassis: front suspension with anti-roll bar, all metal outside the battery box, simulation pedal, oil tank, exhaust pipe, spare tire frame, metal beam, metal wheel hub, etc.
Remote control: Dumbo DUMBO-X6
ESC: Hobbywing 1060
Steering gear: Wei Chuang customized 0900
Motor: Snow Leopard 35T
Battery specifications : 3S , 5200mAh, 11.1V , 25C or more ; battery compartment size: 142*45*40MM (battery size is within this range)
Weight: 6.8KG , plus remote control 7.1KG
Theoretical load: 1 0 KG
Total load weight: 17 KG
Note: the use of remote control . 6 Section . 5 size batteries, the main vehicle battery 11.1V3S lithium or 12V batteries, the battery connector is XT60 .
Operation steps: first turn on the remote control, (the switch or knob of the remote control should be in the default position), then connect the main car power supply, wait for the signal sound to confirm the operation (about 5S ) , if you operate in advance, it is likely to make the power The ESC entered the setting mode, causing the ESC to not work normally .
Main car battery installation: first measure the voltage (battery and power indicator need to be purchased separately, length 142MM wide 45MM high 40MM size 3S lithium battery) , the voltage cannot be lower than 11.1V
Note: the use of remote control . 6 Section . 5 size batteries, the main vehicle battery 11.1V3S lithium or 12V batteries, the battery connector is XT60 .
Operation steps: first turn on the remote control, (the switch or knob of the remote control should be in the default position), then connect the main car power supply, wait for the signal sound to confirm the operation (about 5S ) , if you operate in advance, it is likely to make the power The ESC entered the setting mode, causing the ESC to not work normally .
Main car battery installation: first measure the voltage (battery and power indicator need to be purchased separately, length 142MM wide 45MM high 40MM size 3S lithium battery) , the voltage cannot be lower than 11.1V
Tiếng Việt
English
