DPS Model ManuFactory

Volvo FMX 8x8 Tractor JDM-136 1/14 traction tractor remote control climbing

Description

Proportion: 1:14 Size: Length 669, Width 230, Height 278, Unit MM Weight: 8.1KG, plus remote control 8.56KG Theoretical traction quality: 80KG Remote control: FS-I6S, with 6-channel receiver

Read more
Price
2,387.00$
Quantity
Total
2,387.00 $
Shipping
290$
0 Reviews
ID: Volvo FMX 8x8 Tractor JDM-136 1/14

Proportion: 1:14

Size: Length 669, Width 230, Height 278, Unit MM

Weight: 8.1KG, plus remote control 8.56KG

Theoretical traction quality: 80KG

Remote control: FS-I6S, with 6-channel receiver

Note: Use the remote control 4 AA batteries, main car battery 11.1V3S lithium battery or 12V battery, battery connector is XT60. Operation steps: first turn on the remote control (the switch of the remote control should be in the up position), then connect to the main car power supply, wait for the signal to confirm the operation (within about 5S), if you operate in advance, it is likely to make the ESC enter Set the mode, causing the ESC to not work normally.

Before turning on the remote control, please check that the position of each switch is up and the joystick is back to the neutral position. After confirming, you can turn on the switch

. And the battery indicator needs to be purchased separately with a length of 150MM, a width of 45MM, a height of 40MM, and a 3S lithium battery within the size), the voltage cannot be lower than 11.1V

Proportion: 1:14

Size: Length 669, Width 230, Height 278, Unit MM

Weight: 8.1KG, plus remote control 8.56KG

Theoretical traction quality: 80KG

Remote control: FS-I6S, with 6-channel receiver

Note: Use the remote control 4 AA batteries, main car battery 11.1V3S lithium battery or 12V battery, battery connector is XT60. Operation steps: first turn on the remote control (the switch of the remote control should be in the up position), then connect to the main car power supply, wait for the signal to confirm the operation (within about 5S), if you operate in advance, it is likely to make the ESC enter Set the mode, causing the ESC to not work normally.

Before turning on the remote control, please check that the position of each switch is up and the joystick is back to the neutral position. After confirming, you can turn on the switch

. And the battery indicator needs to be purchased separately with a length of 150MM, a width of 45MM, a height of 40MM, and a 3S lithium battery within the size), the voltage cannot be lower than 11.1V

Add a review
Add Your Review
Related products